How to clean the hanging car body

1. We use leather, plastic, cloth, carpet, vacuum cleaner. Apply the synthetic detergent solution for washing to the cloth and gently scrub the semi-trailer. Wipe carefully with a cloth soaked in water, avoid direct sunlight, and dry in a ventilated place.

Sprinkle the carpet with cleaning agent and wipe with a cloth.

2. Wash the bumper

1. Scrub with a sponge or soft cloth.

Cleaning with abrasive waxes, brushes, can damage the surface.

When it is contaminated by brake oil, engine oil, lubricating oil, electrolyte, etc., scrub with alcohol.

3. Method of cleaning the vehicle 1. Pour water from the upper part of the vehicle and wipe off the sewage with a sponge. For stains that cannot be cleaned with water, please use a neutral detergent. 2. Wash the lower part of the vehicle.

Wear rubber gloves when cleaning the underside of the vehicle.

4. Wipe off the moisture carefully with a soft cloth.

When using a neutral detergent, wipe down the surface of the vehicle to avoid leaving detergent on the painted surface.

Washing the engine with water may cause the wiring harness around the engine to malfunction and affect the normal driving of the vehicle.

After washing the vehicle, test the service braking performance. Lightly depress the brake pedal and check that the brakes are not affected by water.

When the vehicle encounters the following pollution, it may cause corrosion and discoloration of the vehicle body. Therefore, the contaminated site should be cleaned immediately.

5. Waxing

Carry out the body polishing work properly 1~2 times a month, and clean the body dust and moisture before waxing.

1. Adhere the wax to a soft cloth, apply it evenly to the body, and polish it in one direction. Do not use waxes that contain abrasives, which will reduce the paint finish.

2. After a little drying, wipe gently with a soft cloth.

(1) If it is cleaned with an automatic cleaning machine, it may cause the surface of the car body to be scratched by the brush or cause the finish of the paint surface to decrease, so you should pay attention to this.

(2) When cleaning the front windshield, if the wax or waterproof coating for body polishing is used, the glass will be contaminated, and the wiper will vibrate or stick. Therefore, it should be used with caution.

(3) When cleaning the bulb, if you use chemical solvents such as gasoline or acetone, it may damage the bulb.

5. Cleaning of aluminum wheels

When cleaning aluminum wheels, pay attention to the following:

1. Use neutral detergent and wipe it clean quickly after cleaning.

2. Aluminum wheels are easily damaged, so they cannot be cleaned with hard objects such as iron brushes.

3. Do not clean with a high pressure steam cleaner.

4. Perform periodic waxing.

5. When seawater or road anti-icing agent is adhered, it should be cleaned quickly.

When cleaning aluminum wheels, it is strictly forbidden to use acid, otherwise it will corrode the wheel paint